Numerical investigating of the effect of material and geometrical parameters on the static behavior of sandwich plate

Ghaznavi, A.; Shariyat, M.

doi:10.22061/jcarme.2021.7605.2014

تعداد نشریات	13
تعداد شماره‌ها	237
تعداد مقالات	2,400
تعداد مشاهده مقاله	3,863,692
تعداد دریافت فایل اصل مقاله	2,805,272

	Numerical investigating of the effect of material and geometrical parameters on the static behavior of sandwich plate
Journal of Computational & Applied Research in Mechanical Engineering (JCARME)
مقاله 2، دوره 11، شماره 2 - شماره پیاپی 22، فروردین 2022، صفحه 297-315 اصل مقاله (1004.13 K)
نوع مقاله: Research Paper
شناسه دیجیتال (DOI): 10.22061/jcarme.2021.7605.2014
نویسندگان
A. Ghaznavi^* ¹؛ M. Shariyat²
¹Renewable Energies Department, Niroo Research Institute (NRI), Tehran, Iran
²Faculty of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, Iran
تاریخ دریافت: 24 آذر 1399، تاریخ بازنگری: 12 اردیبهشت 1400، تاریخ پذیرش: 03 خرداد 1400
چکیده
Studying the behavior of sandwich panels is very important due to their widespread use in different industries. Therefore, over the past decades, various theories have been proposed to study the behavior of these panels. In this paper a higher order global-local theory with 3D equilibrium-based corrections is presented to study behavior of thick and thin sandwich plate with flexible and auxetic core. In addition to correcting the results with 3D elasticity equations, another important advantage of the presented theory is the ability to consider the transverse core deformation of the sandwich panels. It should be mentioned that to study the behavior of thick sandwich panels, especially with soft core, the existence of this feature is very necessary and has a great effect on the accuracy of the obtained results. Comparison of the obtained results with those existing in valid references showed that the formulation of the provided finite element had a very good accuracy even for thick and thin sandwich plates. Finally, the effect of different material and geometrical parameters on the behavior of sandwich plates are carefully investigated using the presented theory.
کلیدواژه‌ها
Sandwich plate؛ Global-local theory؛ Higher order theory؛ Flexible core؛ Auxetic foam

مراجع
[1] T. Kant, and K. Swaminathan. "Estimation of transverse/interlaminar stresses in laminated composites–a selective review and survey of current developments." Compos.Struct., Vol. 49, No. 1, pp. 65-75, (2000). [2] M. Shariyat, S. M. R. Khalili, and I. Rajabi. "A global–local theory with stress recovery and a new post-processing technique for stress analysis of asymmetric orthotropic sandwich plates with single/dual cores." Comput. Methods Appl. Mech. Eng., Vol. 286, pp. 192-215, (2015). [3] J. N. Reddy, Mechanics of laminated composite plates and shells: theory and analysis. CRC press, (2003). [4] C. Wanji, and W. Zhen. "A selective review on recent development of displacement-based laminated plate theories." Recent Pat.Mech.Eng., Vol. 1, No. 1, pp. 29-44, (2008). [5] E. Carrera, S. Brischetto, and P. Nali. Plates and shells for smart structures: classical and advanced theories for modeling and analysis. Vol. 36. John Wiley & Sons, (2011). [6] S. M. R.Khalili, M. Botshekanan Dehkordi, E. Carrera, and M. Shariyat. "Non-linear dynamic analysis of a sandwich beam with pseudoelastic SMA hybrid composite faces based on higher order finite element theory." Compos. Struct., Vol. 96, pp. 243-255, (2013). [7] C. S. Babu, and T. Kant. "Refined higher order finite element models for thermal buckling of laminated composite and sandwich plates." J.Therm. stresses, Vol. 23, No. 2, pp. 111-130, (2000). [8] A. K. Nayak, S. S. J. Moy, and R. A. Shenoi. "A higher order finite element theory for buckling and vibration analysis of initially stressed composite sandwich plates." J. Sound Vib., Vol. 286, No. 4-5, pp. 763-780, (2005). [9] K. Malekzadeh, M. R. Khalili, and R. K. Mittal. "Local and global damped vibrations of plates with a viscoelastic soft flexible core: an improved high-order approach." J. Sandw., Vol. 7, No. 5, pp. 431-456, (2005). [10] M. M.Kheirikhah, S. M. R. Khalili, and K. Malekzadeh Fard. "Biaxial buckling analysis of soft-core composite sandwich plates using improved high-order theory." Eur. J. Mech. A/Solids, Vol. 31, no. 1, PP. 54-66, (2012). [11] M.Shariyat,"Thermal buckling analysis of rectangular composite plates with temperature-dependent properties based on a layerwise theory." ThinWall Struct., Vol. 45, No. 4, pp. 439-452, (2007). [12] M. Di Sciuva,U. Icardi, and L. Librescu. "Effects of interfacial damage on the global and local static response of cross-ply laminates." Int. J. Fract., Vol. 96, No. 1, pp. 17-35, (1999). [13] R. G.Lage, C. M. Mota Soares, C. A. Mota Soares, and J. N. Reddy. "Analysis of adaptive plate structures by mixed layerwise finite elements." Compos. Struct., Vol. 66, No. 1-4,pp. 269-276, (2004). [14] J. R. Robbins, and J. N. Reddy. "Modelling of thick composites using a layerwise laminate theory." Int.J. Numer.Methods Eng., Vol. 36, No. 4, pp. 655-677, (1993). [15] J. N.Reddy, E. J. Barbero, and J. L. Teply. "A plate bending element based on a generalized laminate plate theory." Int.J. Numer.Methods Eng., Vol. 28, No. 10, pp. 2275-2292, (1989). [16] C. Wanji, and W. Zhen. "A selective review on recent development of displacement-based laminated plate theories." Recent Pat.Mech. Eng., Vol. 1, No. 1, pp. 29-44, (2008). [17] M. Shariyat, "Dynamic thermal buckling of suddenly heated temperature-dependent FGM cylindrical shells, under combined axial compression and external pressure." Int. J. Solids Struct., Vol. 45, No. 9, pp. 2598-2612, (2008). [18] M. Shariyat, "Dynamic buckling of suddenly loaded imperfect hybrid FGM cylindrical shells with temperature-dependent material properties under thermo-electro-mechanical loads." Int. J. Mech. Sci., Vol. 50, No. 12, pp. 1561-1571, (2008). [19] M. Shariyat,"Vibration and dynamic buckling control of imperfect hybrid FGM plates with temperature-dependent material properties subjected to thermo-electro-mechanical loading conditions." Compos. Struct., Vol. 88, No. 2, pp. 240-252, (2009). [20] J. B.Dafedar, Y. M. Desai, and A. A. Mufti. "Stability of sandwich plates by mixed, higher-order analytical formulation.” Int.J.Solids Struct., Vol. 40, No. 17, pp. 4501-4517, (2003). [21] M. B. Dehkordi, M. Cinefra, S. M. R. Khalili, and E. Carrera. "Mixed LW/ESL models for the analysis of sandwich plates with composite faces." Compos. Struct., Vol. 98, pp. 330-339, (2013). [22] K. Malekzadeh,M. R. Khalili, and R. K. Mittal. "Local and global damped vibrations of plates with a viscoelastic soft flexible core: an improved high-order approach." J. Sandw. Struct. Mater., Vol. 7, No. 5, pp. 431-456, (2005). [23] E.Carrera, and S. Brischetto. "A survey with numerical assessment of classical and refined theories for the analysis of sandwich plates." AMR, Vol. 62, No. 1, (2009). [24] S. Brischetto, E. Carrera, and L. Demasi. "Improved bending analysis of sandwich plates using a zig-zag function." Compos. Struct., Vol. 89, No. 3, pp. 408-415, (2009). [25] S. Kapuria, and J. K. Nath. "On the accuracy of recent global–local theories for bending and vibration of laminated plates." Compos. Struct., Vol. 95 pp. 163-172, (2013). [26] M. D. Botshekanan, M. Cinefra, S. M. R. Khalili, and E. Carrera. "Mixed LW/ESL models for the analysis of sandwich plates with composite faces." Compos. Struct., Vol. 98 pp. 330-339, (2013). [27] X. Y. Li, and D. Liu. "Generalized laminate theories based on double superposition hypothesis." Int. J. Numer. Methods Eng., Vol. 40, No. 7, pp. 1197-1212, (1997). [28] K. Asemi, and M. Shariyat. "Three-dimensional biaxial post-buckling analysis of heterogeneous auxetic rectangular plates on elastic foundations by new criteria." Comput. Methods Appl. Mech. Eng., Vol. 302, pp. 1-26, (2016). [29] A. H. D. Chakrabarti, M. A. Iqbal, and A. H. Sheikh. "A new FE model based on higher order zigzag theory for the analysis of laminated sandwich beam with soft core." Compos. Struct., Vol. 93, No. 2, pp. 271-279, (2011). [30] L. Demasi, "Partially zig-zag advanced higher order shear deformation theories based on the generalized unified formulation." Compos. Struct., Vol. 94, No. 2, pp. 363-375, (2012). [31] A. Singhal, A. S. Sahu, and S. Chaudhary. "Liouville-Green approximation: An analytical approach to study the elastic waves vibrations in composite structure of piezo material." Compos. Struct., Vol. 184, pp. 714-727, (2018). [32] N.Grover, , D. K. Maiti, and B. N. Singh. "A new inverse hyperbolic shear deformation theory for static and buckling analysis of laminated composite and sandwich plates." Compos. Struct., Vol. 95, pp. 667-675, (2013). [33] S. Kapuria, and J. K. Nath. "On the accuracy of recent global–local theories for bending and vibration of laminated plates." Compos.Struct. Vol. 95 pp. 163-172, (2013). [34] R. P. Khandelwal, A. Chakrabarti, and P. Bhargava. "A new C0 2D FE model based on improved higher order zigzag theory for the analysis of soft core sandwich plate." Int. J. Appl. Mech. Eng., Vol. 18, No. 2, pp. 395-423, (2013). [35] M. D. Botshekanan, M. Cinefra, S. M. R. Khalili, and E. Carrera. "Mixed LW/ESL models for the analysis of sandwich plates with composite faces." Compos. Struct., Vol. 98, pp. 330-339, (2013). [36] C. H. Thai, L. V. Tran, D. T. Tran, T. Nguyen-Thoi, and H. Nguyen-Xuan. "Analysis of laminated composite plates using higher-order shear deformation plate theory and node-based smoothed discrete shear gap method." Appl. Math. Model., Vol. 36, No. 11, pp. 5657-5677, (2012). [37] N. J.Pagano,"Exact solutions for rectangular bidirectional composites and sandwich plates." J.Compos.Mat., Vol. 4, No. 1, pp. 20-34, (1970). [38] J. N.Reddy, "A simple higher-order theory for laminated composite plates." pp. 745-752, (1984). [39] T. Kant, and K. Swaminathan. "Analytical solutions for the static analysis of laminated composite and sandwich plates based on a higher order refined theory." Compos.Struct., Vol. 56, No. 4, pp. 329-344, (2002). [40] J. L. Mantari, A. S. Oktem, and C. Guedes Soares. "A new trigonometric shear deformation theory for isotropic, laminated composite and sandwich plates.” Int. J. Solids Struct., Vol. 49, No. 1, pp. 43-53, (2012). [41] M. Karama, K. S. Afaq, and S. Mistou. "A new theory for laminated composite plates." Proc. Inst. Mech. Eng., Vol. 223, No. 2, pp. 53-62, (2009).
آمار تعداد مشاهده مقاله: 1,046 تعداد دریافت فایل اصل مقاله: 667

سامانه مدیریت نشریات علمی. طراحی و پیاده سازی از سیناوب

پیوندهای مفید

آمار

Numerical investigating of the effect of material and geometrical parameters on the static behavior of sandwich plate