Journal of Electrical and Computer Engineering Innovations (JECEI)
مقاله 10 ، دوره 6، شماره 1 ، فروردین 2018، صفحه 77-85 1.12 M )
نوع مقاله: Original Research Paper
شناسه دیجیتال (DOI): 10.22061/jecei.2019.1079 نویسندگان
S.E. Abdollahi 1 M. Mirzaei 2 1 Electrical and Computer Engineering Dept., Babol Noshirvani University of Technology, Babol, Iran.2 Electrical Engineering Dept., Amirkabir University of Technology, Tehran, Iran.
تاریخ دریافت : 27 اسفند 1395 ،
تاریخ بازنگری : 07 مرداد 1396 ،
تاریخ پذیرش : 20 آبان 1396
چکیده Background and Objectives: Linear induction motors (LIMs) are widely employed in rail transportation systems due to their robust, simple and low cost structure. Methods: Several methods have evaluated various topologies' performances in the literature. These methods are more and less effective in the intended structures. In this paper, a new two-dimensional analytical method is presented in order to predict developed thrust force of a single-sided linear induction motor with a solid iron secondary. Results: The skin and saturation effects of the induced eddy currents in the solid iron of the secondary are considered in the proposed method. The analytical results are then compared with the 2D finite element simulation and the experimental ones of the research work of Gieras et al. . Conclusion: Results confirm the accuracy of the proposed analytical and finite element methods for the analysis and design of linear induction motors with solid iron secondary. Copyrights کلیدواژهها
Iron secondary ؛ Analytical calculations ؛ Finite element method ؛ Eddy currents ؛ Linear induction motors ؛ Thrust force
مراجع
[1] R. Hellinger, P. Mnich, “Linear motor-powered transportation: history, present status, and future outlook,” Proceedings of the IEEE, 97(9): 1892-1900, 2009.
[2] S. Aleksandrov, T. Overboom, E. Lomonova, “Design optimization and performance comparison of two linear motor topologies with PM-Less tracks,” IEEE Transactions on Magnetics, 54(11): 1-8, 2018.
[3] I. Boldea, M. Pucci, W. Xu, “Design and control for linear machines, drives, and MAGLEVs—Part I,” IEEE Transactions on Industrial Electronics, 65(1): 7423-7426, 2018.
[4] S. E. Abdollahi, M. Mirzayee, M. Mirsalim, “Design and analysis of a double-sided linear induction motor for transportation,” IEEE Transactions on Magnetics, 51(7): 1-7, 2015.
[5] S. E. Abdollahi, S. Vaez-Zadeh, “Back EMF analysis of a novel linear flux switching motor with segmented secondary,” IEEE Transactions on Magnetics, 50(4): 1-9, 2014.
[6] J. Wang, Z. Lin, D. Howe, “Analysis of a short-stroke, single-phase, quasi-Halbach magnetised tubular permanent magnet motor for linear compressor applications,” IET Electric Power Applications, 2(3): 193-200, 2008.
[7] B. Kou, J. Luo, X. Yang, L. Zhang, “Modeling and analysis of a novel transverse-flux flux-reversal linear motor for long-stroke application,” IEEE Transactions on Industrial Electronics, 63(10): 6238-6248, 2016.
[8] D. K. Hong, D. Joo, J. W. Kim, B. C. Woo, D. H. Koo, “Development of thrust force 6 kN class transverse flux linear motor with synchronous control for direct drive applications,” International Journal of Precision Engineering and Manufacturing, 16(1): 191-196, 2015.
[9] R. Cao, Y. Jin, M. Lu, Z. Zhang, “Quantitative comparison of linear flux-switching permanent magnet motor with linear induction motor for electromagnetic launch system,” IEEE Transactions on Industrial Electronics, 65(9): 7569-7578, 2018.
[10] A. Musolino, M. Raugi, R. Rizzo, M. Tucci, “Optimal design of EMALS based on a double-sided tubular linear induction motor,” IEEE Transactions on Plasma Science, 43(5): 1326-1331, 2015.
[11] H. W. Lee, K. C. Kim, J. Lee, “Review of maglev train technologies,” IEEE transactions on magnetics, 42(7): 1917-1925, 2006.
[12] S. Nasar, L. Del Cid, “Propulsion and levitation forces in a single-sided linear induction motor for high-speed ground transportation,” Proceedings of the IEEE, 61(5): 638-644, 1973.
[13] A. Shiri, A. Shoulaie, “Design optimization and analysis of single-sided linear induction motor, considering all phenomena,” IEEE Transactions on energy conversion, 27(2): 516-525, 2012.
[14] M. Flankl, L. de Oliveira Baumann, A. Tüysüz, J. W. Kolar, “Energy Harvesting With Single-Sided Linear Induction Machines Featuring Secondary Conductive Coating,” IEEE Transactions on Industrial Electronics, 66(6): 4880-4890, 2019.
[15] S. Nonaka, T. Higuchi, “Elements of linear induction motor design for urban transit,” IEEE Transactions on Magnetics, 23(5): 3002-3004, 1987.
[16] J. Gieras, A. Eastham, G. Dawson, “Performance calculation for single-sided linear induction motors with a solid steel reaction plate under constant current excitation,” IEE Proceedings B -Electric Power Applications, 132(4): 185-194, 1985.
[17] J. J. Stickler, “A study of single-sided linear induction motor performance with solid iron secondaries,” IEEE Transactions on Vehicular Technology, 31(2): 107-112, 1982.
[18] M. Mirsalim, A. Doroudi, J. Moghani, “Obtaining the operating characteristics of linear induction motors: A new approach,” IEEE Transactions on magnetics, 38(2): 1365-1370, 2002.
[19] J. H. Lee, H. Y. Kim, M. J. Jun, S. C. Lee, “Optimum shape design of single-sided linear induction motors using response surface methodology and finite element method,” in Proc. International Conference on Electrical Machines and Systems (ICEMS)): 1-5, 2011.
[20] G. Lv, D. Zeng, T. Zhou, Z. Liu, “Investigation of forces and secondary losses in linear induction motor with the solid and secondary losses in linear induction motor with the solid and laminated back iron secondary for metro,” IEEE Transactions on Industrial Electronics, 64(6): 4382-4390, 2017.
[21] G. Lv, T. Zhou, D. Zeng, “Influence of the ladder-slit secondary on reducing the edge effect and transverse forces in the linear induction motor,” IEEE Transactions on Industrial Electronics, 65(9): 7516-7525, 2018.
[22] J. F. Gieras, Linear Induction Drives: Clarendon, 1994.
[23] P. D. Agarwal, “Eddy-current losses in solid and laminated iron,” Transactions of the American institute of electrical engineers, Part I: Communication and Electronics, 78(2): 169-181, 1959.
[24] I. Boldea, M. Babescu, “Multilayer approach to the analysis of single-sided linear induction motors,” Proceeding of the Institution of Electrical Engineers, 125(4): 283-287, 1978.
[25] L. R. Neuman (1948), Skin effect in ferromagnetic bodies, Gostekhizdat, M. (in Russian).
[26] K. Pillai, “Fundamental-frequency eddy-current loss due to rotating magnetic field. Part 1: Eddy-current loss in solid rotors,” Proceedings of the Institution of Electrical Engineers, 119(3): 407-410, 1969.
[27] J. Gieras, “Analytical method of calculating the electromagnetic field and power losses in ferromagnetic halfspace, taking into account saturation and hysteresis,” Proceedings of the Institution of Electrical Engineers, 124(11): 1098-1104, 1977.
[28] S. Nasar, G. Xiong, Z. Fu, “Eddy-current losses in a tubular linear induction motor,” IEEE transactions on magnetics, 30, no, 4): 1437-1445, 1994.
[29] G. LV, D. Zeng, T. Zhou, “Analysis of Secondary Losses and Efficiency in Linear Induction Motors with Composite Secondary Based on Space Harmonic Method,” IEEE Transactions on Energy Conversion, 32(4): 1583-1591, 2017.
[30] M. Jagiela, T. Garbiec, “Evaluation of rotor-end factors in solid-rotor induction motors,” IEEE Transactions on Magnetics, 48(1): 137-142, 2012.
[31] N. Kesavamurthy P. Rajagopalan, “The polyphase induction machine with solid iron rotor,” Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems, 78(4): 1092-1097, 1959.
آمار
تعداد مشاهده مقاله: 493
تعداد دریافت فایل اصل مقاله: 858
