تعداد نشریات | 11 |
تعداد شمارهها | 210 |
تعداد مقالات | 2,098 |
تعداد مشاهده مقاله | 2,878,885 |
تعداد دریافت فایل اصل مقاله | 2,086,589 |
3-D RF Coil Design Considerations for MRI | ||
Journal of Electrical and Computer Engineering Innovations (JECEI) | ||
مقاله 7، دوره 5، شماره 2 - شماره پیاپی 10، مهر 2017، صفحه 139-148 اصل مقاله (1.1 M) | ||
نوع مقاله: Original Research Paper | ||
شناسه دیجیتال (DOI): 10.22061/jecei.2017.718 | ||
نویسندگان | ||
M.R. SHIRAVI؛ B. Ganji* | ||
Department of Electrical Engineering, University of Kashan, Kashan, Iran | ||
تاریخ دریافت: 03 مرداد 1396، تاریخ بازنگری: 21 آبان 1396، تاریخ پذیرش: 21 آبان 1396 | ||
چکیده | ||
High-frequency coils are widely used in medical applications, such as Magnetic Resonance Imaging (MRI) systems. A typical medical MRI includes a local radio frequency transmit/receive coil. This coil is designed for maximum energy transfer or wave transfer through magnetic resonance. Mutual inductance is a dynamic parameter that determines the energy quantity to be transferred wirelessly by electromagnetic coupling. Thus, it is essential to analyze the self and mutual inductances of this coil. Other parameters, including electromagnetic shielding, frequency, and distance, which influence voltage and power transfer are investigated here. Theoretical formulas and simulation models proposed in the present paper are implemented by using MATLAB and ANSYS MAXWELL and ANSYS SIMPLORER Finite Element (FE) packages for determining the performance and properties of the coil. So, the main goal is evaluating of software steps that simplify the design of RF resonance circuits. Also, experimental results are given for the validation of the proposed method. Consequently, Safety and efficiency are automatically maximized by following the best design considerations. | ||
کلیدواژهها | ||
Finite element method (FEM)؛ Magnetic resonance imaging (MRI)؛ Mutual inductance؛ Shielding effectiveness | ||
مراجع | ||
[1] E. Bratschun, D. Tait, and N. Moin, “Next-generation MRI scanner,” Colorado State University, Final Project Report, spring 2016. [2] K. N. Bocan and E. Sejdic, “Adaptive transcutaneous power transfer to implantable devices: A state of the art review,” Sensors, vol. 16, no. 3, pp. 393, 2016. [3] S. Y. R. Hui, W. Zhong, and C. K. Lee, “A critical review of recent progress in mid-range wireless power transfer,” IEEE Trans. Power Electronics, vol. 29, no. 9, pp. 4500–4511, 2014. [4] D. Ahn and S. Hong, “Wireless power transmission with self-regulated output voltage for biomedical implant,” IEEE Trans. Ind. Electronics, vol. 61, no. 5, pp. 2225–2235, 2014. [5] D. Ahn and S. Hong, “Wireless power transfer resonance coupling amplification by load-modulation switching controller,” IEEE Trans. Ind. Electronics, vol. 62, no. 2, pp. 898–909, 2015. [6] F. Rodes, M. Zhang, R. Denieport, and X. Wang, “Optimization of the power transfer through human body with an auto-tuning system using a synchronous switched capacitor,” IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 62, no. 2, pp. 129–133, 2015. [7] A. A. Danilov and E. A. Mindubaev, “Influence of angular coil displacements on effectiveness of wireless transcutaneous inductive energy,” Transmission Biomed. Eng., vol. 49, pp. 171–173, 2015. [8] H. Li, J. Li, K. Wang, W. Chen, and X. Yang, “A maximum efficiency point tracking control scheme for wireless power transfer systems using magnetic resonant coupling,” IEEE Trans. Power Electronics, vol. 30, pp. 3998–4008, 2014. [9] M. S. Khoozani, H. M. Kelk, and A. S. Khoozani, “Comprehension of coils overlapping effect,” Open Access Library Journal, vol. 2, no. 1, e945, pp. 1-13, January 2015. [10] R. Dunne, “Electromagnetic shielding techniques for inductive powering applications,” Thesis, Galway University, Ireland, 2009. [11] Y. P. Su, X. Liu, and S. Y. Hui, “Extended theory on the inductance calculation of planar spiral windings including the effect of double-layer electromagnetic shield,” IEEE Trans. Power Electronics, vol. 23, no. 4, pp. 2052-2061, July 2008. [12] S. C. Tang, S. Y. Hui, H. Shu, and H. Chung, “Evaluation of the shielding effects on printed-circuit-board transformers using ferrite plates and copper sheets,” IEEE Trans. Power Electronics, vol. 17, no. 6, pp. 1080-1088, July 2002. [13] R. P. Merril, A twenty-eight channel coil array for improved optic nerve imaging, The University of Utah, May 2010. [14] R. Brown and et al., Magnetic resonance imaging: Physical principles and sequence design, 2nd ed. Hoboken: John Wiley & Sons, 2014. [15] P. Rinck, Magnetic resonance, a critical peer-reviewed introduction, Internet: http://www.magnetic-resonance.org, 2016. [16] A. K. Sawhney: A course in electrical machine design, Dhanpat Rai, and Sons, 1970. [17] W. H. Yeadon and A.W. Yeadon, Handbook of small electric motors, McGraw-Hill, 2001. [18] M. T. Thompson, Inductance calculation techniques, Power Control and Intelligent Motion, December 1999. [19] H. B. Dwight, “Some new formulas for reactance coils,” Trans. Amer. Inst. Electr. Eng., vol. 8, no. 2, pp. 1675–1696, 1919. [20] F. W. Grover, Inductance Calculations: Working Formulas and Tables, New York, NY, USA: Dover, 2004. [21] W. G. Hurley, M. C. Duffy, J. Zhang, I. Lope, B. Kunz, and W. H. Wolfle, “A unified approach to the calculation of self- and mutual-inductance for coaxial coils in air,” IEEE Trans. Power Electronics, vol. 30, no. 11, pp. 6155-6162, November 2015. [22] C. Akyel, S. I. Babic, and M. Mahmoudi, “Mutual inductance calculation for non-coaxial circular air coils with parallel axes,” Progress In Electromagnetics Research, PIER., vol. 91, , pp. 287-301, April 2009. [23] S. I. Babic and C. Akyel, “Calculating mutual inductance between circular coils with inclined axes in air,” IEEE Trans. Magn. , vol. 44, no. 7, pp. 1743 – 1750, 2008. [24] C. Akyel, S. I. Babic, and M. M. Mahmoudi, “Mutual inductance calculation for non-coaxial circular air coils with parallel axes,” Progress in Electromagnetics Research, PIER 91, pp. 287–301, 2009. [25] M. R. Alizadeh Pahlavani and A. Shiri, “Impact of dimensional parameters on mutual inductance of individual toroidal coils analytical and finite element methods applicable to Tokamak reactors,” Progress in Electromagnetics Research B, vol. 24, pp. 63-78, 2010. [26] J. T. Conway, “Inductance calculations for non-coaxial coils using Bessel functions,” IEEE Trans. Magn., vol. 43, no. 3, pp. 1023-1034, 2007. [27] W. G. Hurley and M. C. Duffy, “Calculation of self and mutual impedances in planar sandwich inductors,” IEEE Trans. Magn., vol. 33, no. 3, pp. 2282-2290, May 1997. [28] T. H. Fawzi and P. E. Burke, “The accurate computation of self and mutual inductances of circular coils,” IEEE Trans. Power App. and Systems, vol. PAS-97, no.2, pp. 464 – 468, 1978. [29] X. Liu and S. Y. R. Hui, “Optimal design of a hybrid winding structure for planar contactless battery charging platform,” in Proc. 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting, pp. 2568-2575, 2006. [30] X. Liu, and S. Y. R. Hui, “An analysis of a double-layer electromagnetic shield for a universal contactless battery charging platform,” in Proc. 2005 IEEE 36th Power Electronics Specialists Conference, pp. 1767-1772, 2005. [31] H. W. Secor, Tesla apparatus and experiments-how to build both large and small Tesla and Oudin coils and how to carry on spectacular experiments with them, Practical Electrics, 1921. [32] T. P. Duong and J. W. Lee, “Experimental results of high-efficiency resonant coupling wireless power transfer using a variable coupling method,” IEEE Microw. Wireless Compon. Lett., vol. 21, no. 8, pp. 442–444, Aug. 2011. [33] A. Kurs, A. Karalis, R. Moffatt, J.D. Joannopoulos, P. Fisher, and M. Soljacic, “Wireless power transfer via strongly coupled magnetic resonances,” Science, vol. 317, pp. 83–86, Jul 2007. [34] T. Miyamoto, Y. Uramoto, K. Mori, H. Wada, and T. Hashiguchi: Wireless charging system, U.S. Patent Appl. 20 120 038 317, Feb. 2012. [35] J. Edlinger and J. Steinschaden, “Simulation and Characterization of a Miniaturized Planar Coil,” Thesis, Vorarlberg University, Aug. 2009. [36] C. L. Holloway, “Electromagnetic shielding: principles of shielding of planar materials and shielding of enclosures,” National Institute of Standards of Technology (NIST), U.S. Department of Commerce, July 2010. [37] C. L. Zimmerman, “Low-field classroom nuclear magnetic resonance system,” Massachusetts Institute of Technology, Feb. 2010. | ||
آمار تعداد مشاهده مقاله: 935 تعداد دریافت فایل اصل مقاله: 1,423 |