تعداد نشریات | 11 |
تعداد شمارهها | 210 |
تعداد مقالات | 2,101 |
تعداد مشاهده مقاله | 2,883,925 |
تعداد دریافت فایل اصل مقاله | 2,091,010 |
A numerical and experimental study on buckling and post-buckling of cracked plates under axial compression load | ||
Journal of Computational & Applied Research in Mechanical Engineering (JCARME) | ||
مقاله 3، دوره 4، شماره 1، اسفند 2014، صفحه 43-54 اصل مقاله (2.81 M) | ||
نوع مقاله: Research Paper | ||
شناسه دیجیتال (DOI): 10.22061/jcarme.2014.71 | ||
نویسندگان | ||
M. Shariati* 1؛ A. M. Majd Sabeti2؛ H. Gharooni2 | ||
1Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran | ||
2Department of Mechanical Engineering, Shahrood University of Technology, Shahrood, Iran | ||
تاریخ دریافت: 20 آذر 1391، تاریخ بازنگری: 12 اسفند 1391، تاریخ پذیرش: 18 اسفند 1391 | ||
چکیده | ||
Existence of cracks in industrial structures is one of the important causes of their failure, especially when they are subjected to important axial compressive forces that might lead to buckling. Therefore, it must be considered in stress analysis and designing and loading of such structures. In this paper, the buckling and post-buckling behaviors of stainless-steel cracked plates under axial compression load were investigated both experimentally and numerically and effects of the geometrical and mechanical parameters, such as crack length, crack angle, crack position, plate imperfection, load band, and plate thickness on the critical buckling load were studied. In the experimental study, mechanical properties and plastic behavior of stainless steel plates were determined for the subsequent numerical study. Numerical modeling was carried out by ABAQUS finite element software. Numerical predictions were compared with the experimental results and the reliability of the numerical solution was proven. Results demonstrated the considerable effects of the mentioned parameters on the critical buckling load of plate. | ||
کلیدواژهها | ||
Cracked plate؛ Buckling؛ Post-buckling؛ Experimental method؛ FEM | ||
مراجع | ||
[1] G. C. Sih and YD. Lee, “Tensile and compressive buckling of plates weakened by cracks”, Theoritical and Applied Fracture Mechanics, Vol. 6, No. 2, pp. 129-138, (1986).
[2] D. Shaw and Y. H. Huang, “Buckling behavior of a central cracked thin plate under tension”, Engineering Fracture Mechanics, Vol. 35, No. 6, pp. 1019-1027, (1990).
[3] E. Riks, C. C. Rankin and F. A. Bargon, “Buckling behaviour of a central crack in a plate under tension”, Engineering Fracture Mechanics, Vol. 43, No. 4, pp. 529-548, (1992).
[4] A. N. Guz and M. S. h. Dyshel, “Fracture and buckling of thin panels with edge crack in tension”, Theoritical and Applied Fracture Mechanics, Vol. 36, No. 1, pp. 57-60, (2001).
[5] Y. V. Satish Kumar and J. K. Paik, “Buckling analysis of cracked plates using hierarchical trigonometric functions”, Thin-Walled Structure, Vol. 42, No. 5, pp. 687-700, (2004).
[6] R. Brighenti, “Numerical buckling analysis of compressed or tensioned cracked thin plates”, Engineering. Structure, Vol. 27, No. 2, pp. 265-276, (2005).
[7] R. Brighenti, “Buckling of cracked thin-plates under tension or compression”, Thin-Walled Structure, Vol. 43, No. 2, pp. 209-224, (2005).
[8] R. Brighenti, “Buckling sensitivity analysis of cracked thin plates under membrane tension or compression loading”, Nuclear Engineering and Design, Vol. 239, No. 6, pp. 965-980, (2009).
[9] M. M. Alinia, S. A. A. Hoseinzadeh and H. R. Habashi, “Influence of cracks on buckling and post- buckling behavior of shear panels”, Thin-Walled Structure, Vol. 45, No. 4, pp. 422-431, (2007).
[10] M. M. Alinia, S. A. A. Hoseinzadeh and H. R. Habashi, “Numerical modeling for buckling analysis of cracked shear panels”, Thin-Walled Structure, Vol. 45, No. 12, pp. 1058-1067, (2007).
[11] M. Shariati and A. M. Majd Sabeti, “Numerical Buckling and post-buckling of cracked plates under axial compression load”, Journal of Aerospace Engineering, Vol. 2, No. 2, pp. 84-90, (2009). | ||
آمار تعداد مشاهده مقاله: 3,357 تعداد دریافت فایل اصل مقاله: 2,687 |