Favorable plug shape of an aerospike nozzle in design, over and under expansion conditions

Shahrokhi, A.; Noori, S.

doi:10.22061/jcarme.2017.2162.1243

تعداد نشریات	13
تعداد شماره‌ها	237
تعداد مقالات	2,406
تعداد مشاهده مقاله	3,888,047
تعداد دریافت فایل اصل مقاله	2,826,474

	Favorable plug shape of an aerospike nozzle in design, over and under expansion conditions
Journal of Computational & Applied Research in Mechanical Engineering (JCARME)
مقاله 1، دوره 8، شماره 1 - شماره پیاپی 15، مهر 2018، صفحه 1-14 اصل مقاله (3.02 M)
نوع مقاله: Research Paper
شناسه دیجیتال (DOI): 10.22061/jcarme.2017.2162.1243
نویسندگان
A. Shahrokhi¹؛ S. Noori^* ²
¹School of Creative Arts and Engineering, Staffordshire University, ST42DE, UK
²Aerospace Department, Amirkabir University of Technology,Tehran, Iran
تاریخ دریافت: 03 اردیبهشت 1396، تاریخ بازنگری: 20 مهر 1396، تاریخ پذیرش: 04 دی 1396
چکیده
The influence of the plug shape on the performance of an aerospike nozzle thrust force is studied in different back pressure conditions. To generate smooth plug contours, Cubic B-Spline technique is employed. In the current research, basis functions are obtained using Deboor’s relation. The flow field around the aerospike nozzle is investigated implementing various shapes and the best of the generated configurations is determined. The flow field is simulated using Navier-Stokes equations and k-ε turbulence model. A triangle unstructured grid is applied for discretization of the governing equations. The computational methodology utilizes steady state density-based formulation and a finite volume cell centered scheme is used to discretize the flow field equations. To accelerate the solution convergence, the flow field is divided into several zones and appropriate initial condition is assigned to each zone. Six different shapes of the plug are generated and the effect of the spike shape on the formation of the shock wave and expansion waves is investigated in each case. The thrust force is calculated for each case and the best configuration is determined in terms of the maximum thrust generation. Eventually, the temperature distribution is calculated along the nozzle for further investigations and it is concluded that the best configurations show a lower temperature rise compared to other designs.
کلیدواژه‌ها
Aerospike nozzle؛ Cubic b-spline؛ Turbulence؛ Plug shape

مراجع
[1] J. Hall, “Optimized Dual Expander Aerospike Rocket”, Department of the Airforce Air University Airforce Instituite of Technology, US, Ohio, (2011). [2] T. A. Ladeinde, Performance Comparison Between a Full-Length and a Truncated Aerospike Nozzle, Msc thesis Department of Mechanical and Aerospace Engineering, California State University, Long Beach, (2009). [3] M. Nazarinia, A. Naghib-Lahouti, E. Tolouei, “Design and Numerical Analysis of Aerospike Nozzles with Different Plug Shapes to Compare their Performance with a Conventional Nozzle”, AIAC-11 Eleventh Australian International Aerospace Congress, Melbourne, Australia,13-17 March, (2005). [4] E. Besnard, H. Chen, T. Mueller, and J. Garvey, “Design, Manufacturing and Test of aPlug Nozzle Rocket Engine”, Proceedings of the 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, (2002). [5] E. S. Mcvay, “Design of a Dual-Expander Aerospike Nozzle Rocket Engine”, MSC Thesis,Department of Aerospace Engineering and Mechanics in the Graduate School of the University of Alabama, (2016). [6] P. Lemieux, “Development of a Reusable Aerospike Nozzle for Hybrid Rocket Motors”, 39th AIAA Fluid Dynamics Conference, San Antonio, Texas, (2009). [7] T. Karthikeyan, S. K. Aravindhkumar, J. Arun Kumar, “Design and Analysis of Aerospike Nozzle toImprove Thrust in Hybrid Rocket Engine”, International Journal of Engineering Trends and Techno logy, Vol. 36, No. 7, (2016). [8] T. Niimi, H. Mori, K. Okabe, Y. M. Taniguchi, “Analyses of Flow Field Structures Around Linear-Type Aerospike Nozzles Using LIF and PSP”, 20th International Congress on Instrumentation in Aerospace Simulation Facilities, pp. 15-20, ( 2003). [9] T. Wang, “Effect of Fence on Linear Aerospike Plume-Induced Base-Heating Physics”, Journal of Thermo physics and Heat Transfer, Vol. 14, No. 4, (2000). [10] T. Zebbiche, Z. Youbi, “Supersonic Two-Dimensional Plug Nozzle Conception at High Temperature” , Emirates Journal for Engineering Research, Vol. 11, (2006). [11] S. B. Verma, “Performance Characteristics of Annular Conical Aerospike Nozzle with Free stream Effect”, Journal of Propulsion and Power, Vol. 26, No. 3, (2009). [12] A. Naghib-Lahouti, E. Tolouei, “Investigation of the Effect of Base Bleed on Thrust Performance of a Truncated Aaerospike Nozzle in Off-Design Conditions”, European Conference on Computational Fluid Dynamics, ECCOMAS CFD, Delft, Netherlands, (2006). [13] A. Zilic, D. L. Hitt, and A. A. Alexeenko, “Numerical Simulations of Supersonic Flow in a Liear Aerospike Micronozzle”, 37^th AIAA Fluid Dynamics Conference and Exhibit, 25-28 Jun, Miami, FL, (2007). [14] T. W. Simpson, F. Mistree, “Multidisciplinary Approach to Linear Aerospike Nozzle Optimization”, AIAA journal, Vol. 39, No. 12, (2001). [15] A. N. Kraiko, N. I. Tillyayeva, “Contouring Spike Nozzles and Determining the Optimal Direction of Their Primary Flows”, Journal of Fluid Dynamics,Vol. 42, No. 2, (2007). [16] O. Bozic, D. Porrmann, “Estimation of Flow Field Properties and Thrust Performances of Axisymmetric Plug-Nozzles using CFD Simulations”, Turbulence, Heat and Mass Transfer 6, 14-18 September, Rome, Italy, (2009). [17] M. Imran, “Introduction to Aerospike and its Aerodynamic Features”, International Journal of Scientific and Research Publications, Vol. 6, No. 5, (2016).
آمار تعداد مشاهده مقاله: 2,020 تعداد دریافت فایل اصل مقاله: 2,809

سامانه مدیریت نشریات علمی. طراحی و پیاده سازی از سیناوب

پیوندهای مفید

آمار

Favorable plug shape of an aerospike nozzle in design, over and under expansion conditions