Design and fabrication of an exoskeleton for the rehabilitation of hand fingers

Sarikhani, Benyamin; Ahmadi-Pajouh, Mohammad Ali; Kolivand, Amirhossein; Bakhtiari-Nejad, Firooz

doi:10.22061/jcarme.2025.11546.2542

تعداد نشریات	11
تعداد شماره‌ها	227
تعداد مقالات	2,301
تعداد مشاهده مقاله	3,577,877
تعداد دریافت فایل اصل مقاله	2,619,333

	Design and fabrication of an exoskeleton for the rehabilitation of hand fingers
Journal of Computational & Applied Research in Mechanical Engineering (JCARME)
مقالات آماده انتشار، پذیرفته شده، انتشار آنلاین از تاریخ 25 آبان 1404 اصل مقاله (1.77 M)
نوع مقاله: Research Paper
شناسه دیجیتال (DOI): 10.22061/jcarme.2025.11546.2542
نویسندگان
Benyamin Sarikhani¹؛ Mohammad Ali Ahmadi-Pajouh^* ²؛ Amirhossein Kolivand¹؛ Firooz Bakhtiari-Nejad¹
¹Mechanical Engineering Department, Amirkabir University of Technology, Tehran, Iran
²Biomedical Engineering Department, Amirkabir University of Technology, Tehran, Iran
تاریخ دریافت: 11 دی 1403، تاریخ بازنگری: 20 آبان 1404، تاریخ پذیرش: 25 آبان 1404
چکیده
The hand plays a crucial role in daily activities; injury or paralysis significantly reduces independence. Therefore, robotic hand exoskeletons have been developed to restore motor function safely and effectively. Considering the major role of the hand in daily activities, many researchers have been working on hand rehabilitation exoskeletons. This research presents the design and implementation of a tendon-driven exoskeleton for finger rehabilitation. Continuous passive motion devices are used to maintain and restore the range of motion of the joints. The exoskeleton has been designed to help patients easily perform functional tasks. To achieve this goal, an adjustable thimble mechanism with flexible filament and a finger guide was designed. Also, this design provides the necessary force to fully guide the fingers through the whole range of motion of the joints. The designed mechanism has been modeled and simulated in MATLAB software. It has also been tested on healthy human subjects. Recorded images from the index finger in a complete range of motion have been analyzed to find the finger trajectory during flexion. The metacarpophalangeal joint of the index finger in healthy subjects has a range of motion between 0 and 90 degrees, while the exoskeleton can provide a range of motion between 0 and 94 degrees. Results show that the designed exoskeleton can provide sufficient force and an acceptable range of motion for patients up to level 2 of the Ashworth scale, which is acceptable for most different and functional varieties of continuous passive motion exoskeletons.
کلیدواژه‌ها
Exoskeleton؛ Finger rehabilitation؛ Continuous passive motion exoskeleton؛ Tendon based؛ Finger kinematics

مراجع
[1] J. Iqbal, H. Khan, N. G. Tsagarakis, and D. G. Caldwell, “A novel exoskeleton robotic system for hand rehabilitation – Conceptualization to prototyping,” Biocybern. Biomed. Eng., Vol. 34, No. 2, pp. 79–89, (2014). [2] F. Zhang, L. Hua, Y. Fu, H. Chen, and S. Wang, “Design and development of a hand exoskeleton for rehabilitation of hand injuries,” Mech. Mach. Theory., Vol. 73, pp. 103–116, (2014). [3] J. Yang, H. Xie, and J. Shi, “A novel motion-coupling design for a jointless tendon-driven finger exoskeleton for rehabilitation,” Mech. Mach. Theory., Vol. 99, pp. 83–102, (2016). [4] A. Borboni, J. H. Villafañe, C. Mullè, K. Valdes, R. Faglia, G. Taveggia, S. Negrini, “Robot-Assisted Rehabilitation of Hand Paralysis After Stroke Reduces Wrist Edema and Pain: A Prospective Clinical Trial,” J. Manipulative. Physiol. Ther., Vol. 40, No. 1, pp. 21–30, (2017). [5] L. Dovat, O. Lambercy, B. Salman, V. Johnson, T. Milner, R. Gassert, E. Burdet, T. C. Leong, “A technique to train finger coordination and independence after stroke,” Disabil. Rehabil. Assist. Technol., Vol. 5, No. 4, pp. 279–287, (2010). [6] T. Proietti, K. Nuckols, J. Grupper, D. S. De Lucena, B. Inirio, K. Porazinski, D. Wagner, T. Cole, Ch. Glover, S. Mendelowitz, m. Herman, J. Breen, D. Lin and C. Walsh, “Combining soft robotics and telerehabilitation for improving motor function after stroke,” Wearable Technologies, Vol. 5, p. e1, (2024). [7] B. Birch, E. Haslam, I. Heerah, N. Dechev, and E. J. Park, “Design of a continuous passive and active motion device for hand rehabilitation,” 2008 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Vancouver, Canada, pp. 4306-4309, (2008). [8] R. B. Salter, “The biologic concept of continuous passive motion of synovial joints. The first 18 years of basic research and its clinical application.,” Clin. Orthop. Relat. Res., No. 242, pp. 12–25, (1989). [9] B. B. Kang, H. Choi, H. Lee, and K.-J. Cho, “Exo-Glove Poly II: A Polymer-Based Soft Wearable Robot for the Hand with a Tendon-Driven Actuation System,” Soft Robot, Vol. 6, No. 2, pp. 214–227, (2019). [10] X. Xue, X. Yang, Z. Deng, H. Tu, D. Kong, N. Li, and F. Xu, “Global Trends and Hotspots in Research on Rehabilitation Robots: A Bibliometric Analysis From 2010 to 2020,” Front. Public Health, Vol. 9, (2022). [11] A. Ahmadjou, S. Sadeghi, M. Zareinejad, and H. A. Talebi, “A compact valveless pressure control source for soft rehabilitation glove,” Int. J. Med. Robot. Comput. Assist. Surg., Vol. 17, No. 5, (2021). [12] Y. Fu, F. Zhang, X. Ma, and Q. Meng, “Development of a CPM Machine for Injured Fingers,” 2005 IEEE Engineering in Medicine and Biology 27th Annual Conference, Shanghai, China, pp. 5017–5020, (2005). [13] D. A. Schwartz and R. S. Chafetz, “Continuous Passive Motion following Tenolysis in Hand Therapy Patients: A Retrospective Study,” J. Hand Ther., Vol. 19, No. 4, p. 447, (2006). [14] D. A. Schwartz, “Continuous Passive Motion in the Hand Therapy Clinic,” J. Hand Ther., Vol. 19, No. 4, pp. 448–449, (2006). [15] D. Ring, B. P. Simmons, and M. Hayes, “Continuous passive motion following metacarpophalangeal joint arthroplasty.,” J. Hand Surg. Am., Vol. 23, No. 3, pp. 505–11, (1998). [16] S. Rath, “Immediate Active Mobilization Versus Immobilization for Opposition Tendon Transfer in the Hand,” J. Hand Surg. Am., Vol. 31, No. 5, pp. 754–759, (2006). [17] S. W. O’Driscoll and N. J. Giori, “Continuous passive motion (CPM): theory and principles of clinical application.,” J. Rehabil. Res. Dev., Vol. 37, No. 2, pp. 179–88, (2000). [18] L. M. Feehan, C. S. Tang, and T. R. Oxland, “Early Controlled Passive Motion Improves Early Fracture Alignment and Structural Properties in a Closed Extra-Articular Metacarpal Fracture in a Rabbit Model,” J. Hand Surg. Am., Vol. 32, No. 2, pp. 200–208, (2007). [19] L. A. Bennett, S. C. Brearley, J. A. L. Hart, and M. J. Bailey, “A Comparison of 2 Continuous Passive Motion Protocols After Total Knee Arthroplasty,” J. Arthroplasty, Vol. 20, No. 2, pp. 225–233, (2005). [20] J. Lee, M. Lee, and J. Bae, “Development of a Hand Exoskeleton System for Quantitative Analysis of Hand Functions,” J. Bionic. Eng., Vol. 15, No. 5, pp. 783–794, (2018). [21] B. C. Lee, C. W. Moon, W. S. Choi, Y. M. Kim, Y. B. joo, D. G. Lee, S. J. lee, E. Choi, J. H. Ji, D. W. Shu, K. H. Cho, “Clinical evaluation of usefulness and effectiveness of sitting-type continuous passive motion machines in patients with total knee arthroplasty: a dual-center randomized controlled trial,” BMC Musculoskeletal Disorders, Vol. 25, No. 1, pp. 1–9, (2024). [22] N. S. K. Ho, K. Y. Tong, X. L. Hu, K. L. Fung, X. J. Wei, W. Rong, E. A. Susanto, “An EMG-driven exoskeleton hand robotic training device on chronic stroke subjects: Task training system for stroke rehabilitation,” 2011 IEEE International Conference on Rehabilitation Robotics, Zurich, Switzerland, pp. 1–5, (2011). [23] A. Wege and A. Zimmermann, “Electromyography sensor based control for a hand exoskeleton,” 2007 IEEE International Conference on Robotics and Biomimetics (ROBIO), Sanya, China, pp. 1470–1475, (2007). [24] D. Popov, I. Gaponov, and J.-H. Ryu, “Portable Exoskeleton Glove With Soft Structure for Hand Assistance in Activities of Daily Living,” IEEE/ASME Trans. Mechatron., Vol. 22, No. 2, pp. 865–875, (2017). [25] M. Xiloyannis, L. Cappello, D. B. Khanh, S.-C. Yen, and L. Masia, “Modelling and design of a synergy-based actuator for a tendon-driven soft robotic glove,” 2016 6th IEEE International Conference on Biomedical Robotics and Biomechatronics (BioRob), Singapore, pp. 1213–1219, (2016). [26] S. W. Lee, K. A. Landers, and H.-S. Park, “Development of a Biomimetic Hand Exotendon Device (BiomHED) for Restoration of Functional Hand Movement Post-Stroke,” IEEE Trans. Neural Syst. Rehabil. Eng., Vol. 22, No. 4, pp. 886–898, (2014). [27] M. K. Burns, D. Pei, and R. Vinjamuri, “Myoelectric Control of a Soft Hand Exoskeleton Using Kinematic Synergies,” IEEE Trans. Biomed. Circuits Syst., Vol. 13, No. 6, pp. 1351–1361, (2019). [28] T. Bützer, O. Lambercy, J. Arata, and R. Gassert, “Fully Wearable Actuated Soft Exoskeleton for Grasping Assistance in Everyday Activities,” Soft Robot, Vol. 8, No. 2, pp. 128–143, (2021). [29] D. Xu, Q. Wu, and Y. Zhu, “Development of a soft cable-driven hand exoskeleton for assisted rehabilitation training,” Ind. Robot, Vol. 48, No. 2, pp. 189–198, (2021). [30] C.-Y. Chu and R. M. Patterson, “Soft robotic devices for hand rehabilitation and assistance: a narrative review,” J. Neuroeng. Rehabil., Vol. 15, No. 1, p. 9, (2018). [31] N. Tanczak, A. Yurkewich, F. Missiroli, S. K. Wee, S. Kager, H. Choi, K. J. Cho, C. Piazza, L. Masia and O. Lambercy, “Soft Robotics in Upper Limb Neurorehabilitation and Assistance: Current Clinical Evidence and Recommendations,”Soft Robotics, Vol. 12, No. 3, pp. 303–314, (2025). [32] R. W. Bohannon and M. B. Smith, “Interrater Reliability of a Modified Ashworth Scale of Muscle Spasticity,” Phys. Ther., Vol. 67, No. 2, pp. 206–207, (1987). [33] A. Borboni, M. Mor, and R. Faglia, “Gloreha—Hand Robotic Rehabilitation: Design, Mechanical Model, and Experiments,” J. Dyn. Syst. Meas. Control, Vol. 138, No. 11, (2016). [34] S. Park, L. Bishop, T. Post, Y. Xiao, J. Stein, and M. Ciocarlie, “On the Feasibility of Wearable Exotendon Networks for Whole-Hand Movement Patterns in Stroke Patients,” 2016 IEEE International Conference on Robotics and Automation (ICRA), Stockholm, Sweden, pp. 3729-3735, (2016). [35] L. Randazzo, I. Iturrate, S. Perdikis, and J. d. R. Millan, “mano: A Wearable Hand Exoskeleton for Activities of Daily Living and Neurorehabilitation,” IEEE Robot Autom. Lett., Vol. 3, No. 1, pp. 500–507, (2018). [36] R. L. Drake, A. W. Vogl, and A. W. M. Mitchell, Gray’s Basic Anatomy, 3^rd ed., Elsevier, Chantilly, pp. 382-388, (2022). [37] L. Wang, T. Meydan, and P. Williams, “A Two-Axis Goniometric Sensor for Tracking Finger Motion,” Sensors, Vol. 17, No. 4, p. 770, (2017). [38] D. Hu, D. Howard, and L. Ren, “Biomechanical Analysis of the Human Finger Extensor Mechanism during Isometric Pressing,” PLoS One, Vol. 9, No. 4, p. e94533, (2014). [39] S. H. Kim et al., “Three-Dimensional Magnetic Rehabilitation, Robot-Enhanced Hand-Motor Recovery after Subacute Stroke: A Randomized Controlled Trial,”Brain Sci., Vol. 13, pp. 1685, (2023). [40] J. Lenarcic, T. Bajd, and M. M. Stanišić, Robot mechanisms, Springer Dordrecht, Dordrecht, pp. 313-326, (2012). [41] Abie Salamat Orthopedic Co., “مچ بند آتل دار نئوپرن (Neoprene Wrist Support with Splint),” Abie Salamat Online Medical Store. Accessed: Nov. 04, 2025. [Online]. Available: https://abiesalamat.com/product/%D9%85%DA%86-%D8%A8%D9%86%D8%AF-%D8%A2%D8%AA%D9%84-%D8%AF%D8%A7%D8%B1-%D9%86%D8%A6%D9%88%D9%BE%D8%B1%D9%86/ [42] A. Yu, K. L. Yick, S. P. Ng, and J. Yip, “2D and 3D anatomical analyses of hand dimensions for custom-made gloves,” Appl. Ergon., Vol. 44, No. 3, pp. 381–392, (2013). [43] S. Cobos, M. Ferre, M. A. Sanchez Uran, J. Ortego, and C. Pena, “Efficient human hand kinematics for manipulation tasks,” 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems, Nice, France, pp. 2246–2251, (2008). [44] J. Li, R. Zheng, Y. Zhang, and J. Yao, “iHandRehab: An interactive hand exoskeleton for active and passive rehabilitation,” 2011 IEEE International Conference on Rehabilitation Robotics, Zurich, Switzerland, pp. 1–6, (2011). [45] T. Ahmed et al., “Flexohand: A Hybrid Exoskeleton-Based Novel Hand Rehabilitation Device,” Micromachines, Vol. 12, No. 11, p. 1274, (2021). [46] N. Sun, G. Li, and L. Cheng, “Design and Validation of a Self-Aligning Index Finger Exoskeleton for Post-Stroke Rehabilitation,” IEEE Trans. Neural Syst. Rehabil. Eng., Vol. 29, pp. 1513–1523, (2021). [47] C. J. W. Haarman, E. E. G. Hekman, J. S. Rietman, and H. Van Der Kooij, “Mechanical Design and Feasibility of a Finger Exoskeleton to Support Finger Extension of Severely Affected Stroke Patients,” IEEE Transactions on Neural Systems and Rehabilitation Engineering, Vol. 31, pp. 1268–1276, (2023). [48] M. Blackburn, P. van Vliet, and S. P. Mockett, “Reliability of Measurements Obtained With the Modified Ashworth Scale in the Lower Extremities of People With Stroke,” Phys. Ther., Vol. 82, No. 1, pp. 25–34, (2002).
آمار تعداد مشاهده مقاله: 3 تعداد دریافت فایل اصل مقاله: 4

سامانه مدیریت نشریات علمی. طراحی و پیاده سازی از سیناوب

پیوندهای مفید

آمار

Design and fabrication of an exoskeleton for the rehabilitation of hand fingers