| تعداد نشریات | 15 |
| تعداد شمارهها | 247 |
| تعداد مقالات | 2,519 |
| تعداد مشاهده مقاله | 4,536,997 |
| تعداد دریافت فایل اصل مقاله | 3,329,763 |
بهینهسازی مصرف انرژی و ارتقای آسایش حرارتی در ساختمانهای مسکونی با استفاده از مواد تغییر فازدهنده (مطالعه موردی شهر ایلام) | ||
| معماری و شهرسازی پایدار | ||
| دوره 14، شماره 1، شهریور 1405 | ||
| نوع مقاله: مقاله پژوهشی | ||
| شناسه دیجیتال (DOI): 10.22061/jsaud.2026.113102.2376 | ||
| نویسندگان | ||
| بهروز صالحی* 1؛ علیاصغر بگمحمدی2؛ نازنین نصرالهی3؛ شهلا نوری2؛ سیما فردوسیان4 | ||
| 1استادیار گروه معماری، دانشکده فنی و مهندسی، دانشگاه ایلام، ایلام، ایران | ||
| 2گروه معماری، دانشکده فنی و مهندسی، دانشگاه ایلام، ایلام، ایران | ||
| 3دانشیار گروه معماری، دانشکده فنی و مهندسی، دانشگاه ایلام، ایلام، ایران | ||
| 4دانشکده فنی و مهندسی، دانشگاه ایلام، ایلام، ایران | ||
| تاریخ دریافت: 25 خرداد 1405، تاریخ بازنگری: 28 مرداد 1405، تاریخ پذیرش: 25 آبان 1405 | ||
| چکیده | ||
| چکیده: در سالهای اخیر، استفاده از مواد تغییر فاز دهنده برای کاهش مصرف انرژی و بهبود وضعیت آسایش حرارتی ساختمانها بطور گسترده مورد توجه پژوهشگران قرار گرفته است. در این مطالعه، به بررسی میزان تأثیر استفاده از مواد تغییر فاز دهنده در کاهش مصرف انرژی و بهبود وضعیت آسایش حرارتی در ساختمانهای مسکونی شهر ایلام پرداخته شده است. برای بررسی میزان تاثیر مواد تغییر فازدهنده از چهار ماده پارافینی با نقاط ذوب مختلف و در سه موقعیت مختلف در سقفهای تیرچه و بلوک استفاده شد و میزان مصرف انرژی هر حالت در رمافزار Design Builder شبیهسازی گردید. برای ارزیابی، یک آپارتمان مسکونی مرجع با 8 واحد مسکونی و که هر کدام از واحدها دارای مساحت تقریبی 100 متر مربع بودند استفاده شد. نتایج نشان داد استفاده از مواد تغییر فاز دهنده با هر نقطه ذوب و در هر مکانی از سقف باعث کاهش مصرف انرژی و بهبود وضعیت آسایش حرارتی در ساختمان میگردد. نتایح نشان داد بهترین مکان برای استفاده از مواد پارافین در اقلیم ایلام قرارگیری پارافین در حد فاصل بتن سازهای سقف و بتن سبک بود و پارافین با نقطه ذوب 19 درجه سانتیگراد بهترین عملکرد را از خود نشان داده و استفاده از آن در طول سال میتواند میزان مصرف انرژی را تا 37 درصد کاهش دهد. | ||
| کلیدواژهها | ||
| معماری پایدار؛ مواد تغییر فاز دهنده؛ آسایش حرارتی؛ مصرف انرژی؛ شهر ایلام | ||
| عنوان مقاله [English] | ||
| Optimizing Energy Consumption and Improving Thermal Comfort in Residential Buildings through the Application of Phase Change Materials: A Case Study of Ilam City | ||
| نویسندگان [English] | ||
| Behrouz Salehi1؛ Aliasghar Bagmohamadi2؛ Nazanin Nasrolahi3؛ Shahla Nouri2؛ Sima Ferdosian4 | ||
| 1Department of Architectural Engineering, Ilam University, Ilam 69315-516, Iran | ||
| 2Department of Architectural Engineering, Ilam University, Ilam 69315-516, Iran | ||
| 3Associate Professor, Department of Architecture, Faculty of Technology and Engineering, Ilam University,Ilam, Iran | ||
| 4Department of Architectural Engineering, Ilam University, Ilam 69315-516, Iran | ||
| چکیده [English] | ||
| Abstract In recent years, the integration of Phase Change Materials (PCMs) into building envelopes has gained significant scholarly attention as an effective passive strategy for enhancing building energy efficiency and indoor thermal comfort. This research investigates the thermal performance and energy-saving potential of incorporating paraffin-based PCMs into residential buildings located in Ilam, a city characterized by a hot and semi-arid climate. To conduct a comprehensive assessment, four distinct types of paraffin with varying melting points were integrated into beam-and-block ceiling slabs at three different structural positions. The dynamic thermal behavior and annual energy consumption of the building were meticulously simulated using the DesignBuilder software environment. The case study utilized a reference apartment block comprising eight residential units, each with a floor area of approximately 100 square meters. The simulation results indicate that the integration of PCMs, irrespective of the specific melting point or installation layer, consistently contributes to a reduction in heating and cooling energy demand and enhances occupant thermal comfort levels. Comparative analysis of the tested configurations reveals that the optimal installation strategy for the climate of Ilam is to position the PCM layer between the structural concrete slab and the lightweight concrete topping of the ceiling. Furthermore, the findings demonstrate that paraffin with a melting point of 19°C exhibits the superior thermal performance in this climatic context. Remarkably, the application of this optimized configuration can result in an annual reduction in total energy consumption of up to 37%. These findings provide valuable insights for architects and engineers aiming to implement sustainable, energy-efficient solutions in residential construction within hot and semi-arid regions. | ||
| کلیدواژهها [English] | ||
| Sustainable Architecture, Phase Change Materials (PCMs), Thermal Comfort, Energy Consumption, Ilam City | ||
| مراجع | ||
|
| ||
|
آمار تعداد مشاهده مقاله: 1 |
||