ارتقاء عملکرد بادگیر سنتی بابهره گیری از صفحه جاذب انرژی خورشیدی

Abdallah, A. S. H., Hiroshi, Y., Goto, T., Enteria, N., Radwan, M. M., & Eid, M. A. (2014). Parametric investigation of solar chimney with new cooling tower integrated in a single room for New Assiut city, Egypt climate. International Journal of Energy and Environmental Engineering, 5, 1-9. https://doi.org/10.1007/s40095-014-0092-6

Abdallah, A. S. H., Yoshino, H., Goto, T., Enteria, N., Radwan, M. M., & Eid, M. A. (2013). Integration of evaporative cooling technique with solar chimney to improve indoor thermal environment in the New Assiut City, Egypt. International Journal of Energy and Environmental Engineering, 4, 1-15 https://doi.org/10.1186/2251-6832-4-45.

Abdo, P., Taghipour, R., & Huynh, B. P. (2020). Three-dimensional simulation of wind-driven ventilation through a windcatcher with different inlet designs. Journal of Thermal Science and Engineering Applications, 12(4), 041008. https://doi.org/10.1115/1.4045513

Bansal, N. K., & Minke, G. (1995). Climatic zones and rural housing in India: Publikationen vor 2000.

Calautit, J. K. S., Hughes, B. R., & Ghani, S. (2013). Numerical investigation of the integration of heat transfer devices into wind towers. Chemical Engineering Transactions, 34, 43-48. http://dx.doi.org/10.3303/CET1334008

Casey, M., & Wintergerste, T. (2000). European research community on flow, turbulence and combustion. ERCOFTAC best practice guidelines: ERCOFTAC special interest group on “quality and trust in industrial CFD.

Dehghani Mohammadabadi, Hossein, Yazdanfar, Seyyed Abbas, Dehghan, Ali Akbar, & Dehghani Mohammadabadi, Abolfazl. (2017). Numerical analysis of the performance of four-sided wind tower attached to parlor and courtyard in different wind incident angles. Modares Mechanical Engineering, 16(12), 125-134.  

Elmualim, A. A. (2006a). Dynamic modelling of a wind catcher/tower turret for natural ventilation. Building Services Engineering Research and Technology, 27(3), 165-182. https://doi.org/10.1191/0143624406bse159oa

Elmualim, A. A. (2006b). Effect of damper and heat source on wind catcher natural ventilation performance. Energy and Buildings, 38(8), 939-948. DOI: 10.1016/j.enbuild.2005.11.004

Elmualim, A. A., & Awbi, H. B. (2002). Wind tunnel and CFD investigation of the performance of “Windcatcher” ventilation systems. International Journal of ventilation, 1(1), 53-64. https://doi.org/10.1080/14733315.2002.11683622

Franke, J., Hirsch, C., Jensen, A., Krüs, H., Schatzmann, M., Westbury, P., Wright, N. (2004). Recommendations on the use of CFD in wind engineering, In Proceedings of the International Conference on Urban Wind Engineering and Building Aerodynamics, von Karman Insitute for Fluid Dynamics.

Ghadiri, M. H., Mohamed, M. F., & Ibrahim, N. L. N. (2012). Cfd analysis of natural ventilation behaviour in four sided wind catcher. International Journal of Aerospace and Mechanical Engineering, 6(12), 2726-2730.

Hughes, B. R., & Ghani, S. A. (2009). A numerical investigation into the effect of windvent dampers on operating conditions. Building and Environment, 44(2), 237-248. https://doi.org/10.1016/j.buildenv.2008.02.012

Jafari, S.; Kalantar, V. (2022). Numerical simulation of natural ventilation with passive cooling by diagonal solar chimneys and windcatcher and water spray system in a hot and dry climate. Energy and Buildings, 256, 111714. https://doi.org/10.1016/j.enbuild.2021.111714

Jazayeri, E., & Gorginpour, A. (2011). Construction of windcatcher and necessity of enhancing the traditional windcatcher. Magazine of Civil engineering(6), 56-60.

Jomehzadeh, F., Hussen, H. M., Calautit, J. K., Nejat, P., & Ferwati, M. S. (2020). Natural ventilation by windcatcher (Badgir): A review on the impacts of geometry, microclimate and macroclimate. Energy and Buildings, 226, 110396. https://doi.org/10.1016/j.enbuild.2020.110396

Khakzand, M., Deljouiee, B., Chahardoli, S., & Siavashi, M. (2024). Radiative cooling ventilation improvement using an integrated system of windcatcher and solar chimney. Journal of Building Engineering, 83, 108409.

Li, L., & Mak, C. M. (2007). The assessment of the performance of a windcatcher system using computational fluid dynamics. Building and Environment, 42(3), 1135-1141.

Looman, R., Cauberg, H., van den Dobbelsteen, A., van Timmeren, A., & Tenpierik, M. (2004). Climate–responsiveness of Building Elements. Paper presented at the Proceedings of PLEA.

Ma, Q., Qian, G., Yu, M., Li, L., & Wei, X. (2024). Performance of Windcatchers in Improving Indoor Air Quality, Thermal Comfort, and Energy Efficiency: A Review. Sustainability, 16(20), 9039.

Maerefat, M., & Haghighi, A. (2010). Natural cooling of stand-alone houses using solar chimney and evaporative cooling cavity. Renewable Energy, 35(9), 2040-2052.

Mahdavinejad, M., & Khazforoosh, S. (2014). Combination of wind catcher and chimney for more energy efficient architectural buildings. Sustain Energy, 2(1), 35-38.

Mohamadabadi, H. D., Dehghan, A. A., Ghanbaran, A. H., Movahedi, A., & Mohamadabadi, A. D. (2018). Numerical and experimental performance analysis of a four-sided wind tower adjoining parlor and courtyard at different wind incident angles. Energy and Buildings, 172, 525-536.

Monghasemi, N., & Vadiee, A. (2018). A review of solar chimney integrated systems for space heating and cooling application. Renewable and Sustainable Energy Reviews, 81, 2714-2730.

Moosavi, L., Zandi, M., Bidi, M., Behroozizade, E., & Kazemi, I. (2020). New design for solar chimney with integrated windcatcher for space cooling and ventilation. Building and Environment, 181, 106785.

Noroozi, A., Veneris, Y.S. (2018) Thermal Assessment of a Novel Combine Evaporative Cooling Wind Catcher. Energies, 11(2), 442-452.

Nouanégué, H., Alandji, L., & Bilgen, E. (2008). Numerical study of solar-wind tower systems for ventilation of dwellings. Renewable Energy, 33(3), 434-443.

Saadatian, O., Haw, L. C., Sopian, K., & Sulaiman, M. Y. (2012). Review of windcatcher technologies. Renewable and Sustainable Energy Reviews, 16(3), 1477-1495.

Saifi, N., Baadi, A., Ghedamsi, R., Guerrout, A., & Settou, N. (2024). An experimental study and numerical simulation of natural ventilation in a semi-arid climate building using a wind catcher with evaporative cooling system and solar chimney. Journal of Building Engineering, 85, 108475.

Tominaga, Y., Mochida, A., Yoshie, R., Kataoka, H., Nozu, T., Yoshikawa, M., & Shirasawa, T. (2008). AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings. Journal of wind engineering and industrial aerodynamics, 96(10-11), 1749-1761.

Zarandi, M. M. (2009). Analysis on Iranian wind catcher and its effect on natural ventilation as a solution towards sustainable architecture (Case Study: Yazd). International Journal of Humanities and Social Sciences, 3(6), 668-673.